Drilling
Brand: TORK CRAFT
Model: TC915051
TCT hole saw
Hole saw diameter:
ø100mm
Application:
The multiple precision ground Tungsten Carbide Tipped hole saw has been
specially developed to cut holes in hard materials such as plastic and metals up
to 14.5mm in thickness.
The hole saw can be used to cut into:
Mild steel shee..
R 599.60
Brand: TORK CRAFT
Model: TC915080
HOLE SAW SET TCT 5PC 16,20,22,25.32MM FOR METAL C/W CARRY CASE....
R 637.10
Brand: TORK CRAFT
Model: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 29.62
Brand: TORK CRAFT
Model: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 38.29
Brand: TORK CRAFT
Model: TCAC006
6mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 347.85
Brand: TORK CRAFT
Model: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: Ø 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 418.88
Brand: TORK CRAFT
Model: TCAC012-3
ANNULAR HOLE CUTTER TCT 12 X 35MM WELD SHANK 19.05MM....
R 676.18
Brand: TORK CRAFT
Model: TCAC013-1
Annular Cutters 30mm
Annular Cutter: Ø 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 316.75
Brand: TORK CRAFT
Model: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 394.45
Brand: TORK CRAFT
Model: TCAC014-3
ANNULAR HOLE CUTTER TCT 14 X 35MM WELD SHANK 19.05MM....
R 676.18
Brand: TORK CRAFT
Model: TCAC014-4
ANNULAR HOLE CUTTER TCT 14 X 55MM WELD SHANK 19.05MM....
R 765.01
Brand: TORK CRAFT
Model: TCAC015-1
Annular Cutters 30mm
Annular Cutter: Ø 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 300.50