Steel / Metals
Out Of Stock
Brand: TORK CRAFT
Model: TCAC0005-01
PILOT PIN TCT CUTTER 12 - 17MM X 55MM 6.3 X 106MM BROACH CUTTERS....
R 95.05
Brand: TORK CRAFT
Model: TCAC008
8mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 286.75
Brand: TORK CRAFT
Model: TCAC011
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 342.90
Brand: TORK CRAFT
Model: TCAC012-1
Annular Cutters 30mm
Annular Cutter: Ø 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in ..
R 324.69
Out Of Stock
Brand: TORK CRAFT
Model: TCAC016-1
Annular Cutters 30mm
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 340.30
Brand: TORK CRAFT
Model: TCAC016-3
ANNULAR HOLE CUTTER TCT 16 X 35MM WELD SHANK 19.05MM....
R 676.18
Brand: TORK CRAFT
Model: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: Ø 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 441.10
Brand: TORK CRAFT
Model: TCAC018-2
Annular Cutters 55mm long
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 513.07
Out Of Stock
Brand: TORK CRAFT
Model: TCAC019-1
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 364.55
Brand: TORK CRAFT
Model: TCAC020-1
Annular Cutters 30mm
Annular Cutter: Ø 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 398.25
Brand: TORK CRAFT
Model: TCAC021-1
Annular Cutters 30mm
Annular Cutter: Ø 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 400.45
Brand: TORK CRAFT
Model: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: Ø 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 531.95