Router Bits
Brand: PRO-TECH
Model: KP570811
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 381.35
Brand: PRO-TECH
Model: KP570841
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 381.35
Brand: PRO-TECH
Model: KP570851
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 381.35
Out Of Stock
Brand: PRO-TECH
Model: KP580021
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 3/8 inch
Ø 1/8 inch
Metric
Ø 9.53mm
Ø 3.18mm....
R 117.85
Brand: PRO-TECH
Model: KP580061
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 1/2 inch
Ø 1/4 inch
Metric
Ø 12.7mm
Ø 6.35mm....
R 117.85
Brand: PRO-TECH
Model: KP580081
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 3/4 inch
Ø 1/4 inch
Metric
Ø 19.02mm
Ø 6.35mm....
R 123.75
Brand: PRO-TECH
Model: KP601209
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
R 1,769.80
Brand: PRO-TECH
Model: KP604411-21
Glue joint set
Carbide
Tipped - Wedge glue joint
The cutter set contains both the groove and tongue cutters to create a wedge
glue joint. The wedge profile assists with alignment during assembly and adds a
greater glue surface, resulting in a stronger joint.
The cutter set is des..
R 2,323.20
Brand: PRO-TECH
Model: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,216.40
Brand: PRO-TECH
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 798.45
Brand: PRO-TECH
Model: KP609011-1
Spare
cutter (slot cutter)
Router bit spare part
The slot cutter is compatible with the following cutters:
KP609011
KP609411
KP851
KP551....
R 192.75
Brand: PRO-TECH
Model: KP686
25 Degree Raised Panel bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,327.05