Router Bits
Brand: PRO-TECH
Model: KP410411
Rail & Stile cutter set
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table. Both cutters are fixed to the shank - The rail cutter can't be ch..
R 2,323.15
Brand: PRO-TECH
Model: KP413611
Spindle
cutter - Reversible Rail & Stile
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used in door manufacturing to profile and join the rails and stiles. For example: Kitc..
R 1,991.15
Brand: PRO-TECH
Model: KP4302
Arbor
Arbor - Slot cutter
Use this arbor fitted with a slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure tha..
R 860.40
Brand: PRO-TECH
Model: KP49574
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may..
R 1,277.20
Brand: PRO-TECH
Model: KP4MM
Single
flute Straight bit
Carbide Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut qu..
R 159.30
Brand: PRO-TECH
Model: KP532411
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment duri..
R 1,343.70
Brand: PRO-TECH
Model: KP551-4
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 237.80
Brand: PRO-TECH
Model: KP57136
Coutertop
trimming router bit
6
Wing Carbide
Tipped
Create extra-smooth shallow recesses in countertops with this 6-wing router
bit. The radiused cutting tips produce an edge that's easy on the fingers and simple to clean. Used in a
large handheld router.
This router bit has a
..
R 1,105.70
Brand: PRO-TECH
Model: KP580011
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 1/4 inch
Ø 1/8 inch
Metric
Ø 6.35mm
Ø 3.18mm....
R 117.85
Brand: PRO-TECH
Model: KP580091
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 3/4 inch
Ø 1/2 inch
Metric
Ø 19.02mm
Ø 12.7mm....
R 176.25
Brand: PRO-TECH
Model: KP5901
Multi-bead
Carbide
Tipped
This
router bit is used for creating a single bead (also referred to as a reed) with
fillets and a rounded edge with the same radius to give a classic rounded off finish
in one pass.
Control cut design helps minimize kickback
Smooth edge requires littl..
R 654.35