Door Making Bits
Brand: FESTOOL
Model: FES491137
Festool Profile cutter HW S8 D42/13/R6+12
Order number: FES491137
Model: HW S8 D42/13/R6+12 ....
R 2,596.80
Brand: PRO-TECH
Model: KP24152010
Point Cutting Ogee bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make ogee shaped panels for any project by routing side by side grooves on the face of the panel.
They may also be used ..
R 588.35
Brand: PRO-TECH
Model: KP387
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,040.45
Brand: PRO-TECH
Model: KP402441
Panel Raiser-Wavy router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,216.40
Brand: PRO-TECH
Model: KP410411
Rail & Stile cutter set
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table. Both cutters are fixed to the shank - The rail cutter can't be ch..
R 2,323.15
Brand: PRO-TECH
Model: KP49574
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may..
R 1,277.20
Brand: PRO-TECH
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 852.25
Brand: PRO-TECH
Model: KP689
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,277.20
Brand: PRO-TECH
Model: KP851
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most lar..
R 1,094.75
Brand: PRO-TECH
Model: KP863060
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the ra..
R 1,991.15
Brand: PRO-TECH
Model: KP90
Vertical Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the..
R 1,437.75
Brand: PRO-TECH
Model: KP93
Euro Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,327.05