Router Bits
Brand: PRO-TECH
Model: KP4102
3
Wing Slot Cutter
Replacement blade
For
3-Wing carbide tipped
Three-wing slot cutters are convenient where intermediate feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP..
R 338.65
Brand: PRO-TECH
Model: KP4103
3
Wing Slot Cutter
Replacement blade
For
3-Wing carbide tipped
Three-wing slot cutters are convenient where intermediate feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP..
R 338.65
Brand: PRO-TECH
Model: KP4104
3
Wing Slot Cutter
Replacement blade
For
3-Wing carbide tipped
Three-wing slot cutters are convenient where intermediate feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP..
R 358.00
Brand: PRO-TECH
Model: KP412431
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,548.40
Brand: PRO-TECH
Model: KP4301
Biscuit
Slot Cutter
Replacement shaft
Arbor
for Slotting Cutters
We offer a spare / loose arbor for our range of slot cutters. It comes with a ¼" shank and will accept cutters with a 5/16 " arbor hole.
PRO-TECH
router bits are manufactured in Taiwan.....
R 167.70
Brand: PRO-TECH
Model: KP452411
Double reversible rail & stile cutter set
Carbide Tipped
- Ogee
The cutter contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that ..
R 1,437.75
Brand: PRO-TECH
Model: KP47111
DYNABIT Flush
Trim bit
Carbide
Tipped
This router bit features a slanted cutting edge for enhanced finishes in
difficult materials. Our flush trim bits feature outstanding tool longevity. Featuring excellent carbide
brazing, a broad selection of sizes and most importantly quality of cut...
R 273.25
Brand: PRO-TECH
Model: KP49570
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used f..
R 557.85
Brand: PRO-TECH
Model: KP4MM-2
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut q..
R 380.85
Brand: PRO-TECH
Model: KP5
Spindle
cutter - Full bead/Half round/Bull nose 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut full beads, half rounds or a bull nose.
KP800020..
R 1,079.45
Brand: PRO-TECH
Model: KP501011
Keyhole or hang slot cutter
Keyhole cutter 9.58mm wide
This bit is so different from the usual 'edge treatment' bits that it deserves highlighting.
It is a highly specialised bit that is used for one purpose only, to cut keyhole slots in picture frames or any object you would like to han..
R 237.75
Brand: PRO-TECH
Model: KP520411
Finger joint router bit
Carbide Tipped
- Finger joint
The router bit is a counter profile bit designed to join the end grains of wood.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the ..
R 1,880.45