Router Bits
Brand: PRO-TECH
Model: KP703
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 346.95
Brand: PRO-TECH
Model: KP801
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 185.35
Brand: PRO-TECH
Model: KP831010
Spindle
cutter - Ogee lip
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without t..
R 1,327.05
Brand: PRO-TECH
Model: KP844
DISH CARV. BIT 1 1/4'D X 5/8' L X 1/4' R X 1/2' SHANK INCL. BEARING....
R 610.75
Brand: PRO-TECH
Model: KP846
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,322.65
Brand: PRO-TECH
Model: KP851
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most lar..
R 1,094.75
Brand: PRO-TECH
Model: KP859
Multiform
Multiform - Moulding maker router bit
Use any portion of the router bit to create many profile possibilities.
Create your own design!
Below is an example of a profile made by flipping over the board and
adjusting the height of cut and setting the router table fence.
..
R 1,880.45
Brand: PRO-TECH
Model: KP863060
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the ra..
R 1,991.15
Brand: PRO-TECH
Model: KP90
Vertical Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the..
R 1,437.75
Brand: PRO-TECH
Model: KP93
Euro Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,327.05
Brand: PRO-TECH
Model: KPFJ-02
Spare
blade
Router bit spare part
The cutter blade can be used as a spare blade for the KPFJ-01 finger
jointer or it can be added to the stack of finger jointer blades to have a
total of 4 blades.....
R 910.85