Search
Search Criteria
Products meeting the search criteria
Free
Brand: ALPEN
Model: ALP KIT30
Drill & Screw Set,
30 pcs [KIT 30]
Alpen multipurpose drill bit and screwdriver set in a handy plastic carry
case. Versitile and handy for a quick job on the
jobsite
Range
of application:
For drilling into wood, steel and masonry with the added
convenience of screwdriver bits ready ..
R 1,174.05
Out Of Stock
Brand: ALPEN
Model: ALP KIT22
Drill & Screw Set, 22 pcs [KIT 22]
Alpen multipurpose drill bit and screwdriver set in a handy plastic carry
case. Versitile and handy for a quick job on the
jobsite
Range
of application:
For drilling into steel and masonry with the added
convenience of screwdriver bits ready at hand...
R 807.85
Brand: TORK CRAFT
Model: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,016.10
Brand: TORK CRAFT
Model: TCAC012-1
Annular Cutters 30mm
Annular Cutter: Ø 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in ..
R 324.69
Out Of Stock
Brand: TORK CRAFT
Model: TCAC016-1
Annular Cutters 30mm
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 340.30
Brand: TORK CRAFT
Model: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: Ø 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 441.10
Brand: TORK CRAFT
Model: TCAC018-2
Annular Cutters 55mm long
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 513.07
Out Of Stock
Brand: TORK CRAFT
Model: TCAC019-1
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 364.55
Brand: TORK CRAFT
Model: TCAC020-1
Annular Cutters 30mm
Annular Cutter: Ø 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 398.25
Brand: TORK CRAFT
Model: TCAC021-1
Annular Cutters 30mm
Annular Cutter: Ø 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 400.45
Brand: TORK CRAFT
Model: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: Ø 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 531.95
Brand: TORK CRAFT
Model: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: Ø 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 560.60
