PRO-TECH
Pro-Tech Router Bits, Cutters and Saw Blades are known by Woodworkers in the professional and Do-it-Yourself
trade for almost 35 years.
| Company website | Catalogue Download |
Brand: PRO-TECH
Model: KP580061
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 1/2 inch
Ø 1/4 inch
Metric
Ø 12.7mm
Ø 6.35mm....
R 117.85
Brand: PRO-TECH
Model: KP580081
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 3/4 inch
Ø 1/4 inch
Metric
Ø 19.02mm
Ø 6.35mm....
R 123.75
Brand: PRO-TECH
Model: KP601209
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
R 1,769.80
Brand: PRO-TECH
Model: KP604411-21
Glue joint set
Carbide
Tipped - Wedge glue joint
The cutter set contains both the groove and tongue cutters to create a wedge
glue joint. The wedge profile assists with alignment during assembly and adds a
greater glue surface, resulting in a stronger joint.
The cutter set is des..
R 2,323.20
Brand: PRO-TECH
Model: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,216.40
Brand: PRO-TECH
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 798.45
Brand: PRO-TECH
Model: KP609011-1
Spare
cutter (slot cutter)
Router bit spare part
The slot cutter is compatible with the following cutters:
KP609011
KP609411
KP851
KP551....
R 192.75
Brand: PRO-TECH
Model: KP686
25 Degree Raised Panel bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,327.05
Brand: PRO-TECH
Model: KP6MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 176.05
Brand: PRO-TECH
Model: KP7004-5
Biscuit
Slot Cutter
Replacement blade
For
Biscuit slot cutter KP7004 & KP7005
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20..
R 317.15
Brand: PRO-TECH
Model: KP701
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 273.65
Brand: PRO-TECH
Model: KP702
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 312.00