Annular / Broach / Weldon Shank
Brand: TORK CRAFT
Model: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,159.50
Out Of Stock
Brand: TORK CRAFT
Model: TCAC0005-02
PILOT PIN TCT CUTTER 18 - 102MM X 35MM 7.9 X 90MM BROACH CUTTERS....
R 90.50
Brand: TORK CRAFT
Model: TCAC0005-03
PILOT PIN TCT CUTTER 12 - 17MM X 35MM 6.3 X 90MM BROACH CUTTE....
R 62.85
Out Of Stock
Brand: TORK CRAFT
Model: TCAC0005-04
PILOT PIN TCT CUTTER 18MM - 102MM X 50MM 7.9 X 108MM BROACH CUTTE....
R 88.06
Brand: TORK CRAFT
Model: TCAC009
9mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 360.35
Brand: TORK CRAFT
Model: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 380.30
Brand: TORK CRAFT
Model: TCAC012-4
ANNULAR HOLE CUTTER TCT 12 X 55MM WELD SHANK 19.05MM....
R 765.01
Brand: TORK CRAFT
Model: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: Ø 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 418.88
Brand: TORK CRAFT
Model: TCAC014-1
Annular Cutters 30mm
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 316.75
Brand: TORK CRAFT
Model: TCAC015-2
Annular Cutters 55mm long
Annular Cutter: Ø 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 400.45
Brand: TORK CRAFT
Model: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 448.25
Brand: TORK CRAFT
Model: TCAC016-4
ANNULAR HOLE CUTTER TCT 16 X 55MM WELD SHANK 19.05MM....
R 765.01