Collets / Chuck
Brand: PG
Model: M8020
Collet set for thread 9/32 x 40
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
Ø 0.80mm
Ø 2.35mm
Ø 3.00mm
Ø 3.20mm
Collet nut included for 9/32 x 40 thread....
R 179.40
Brand: PG
Model: M8550
Keyless chuck for thread 8 x 0.75
The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm.....
R 376.30
Brand: TORK CRAFT
Model: TC08392
Replacement collet - Ø 1.6mm
The collet is used to hold mini rotary accessories with a shank diameter of Ø 1.6mm....
R 20.85
Brand: TORK CRAFT
Model: TCMT001-2-3-1
Flexible shaft for TCMT001 rotary tool
Collet diameter: Ø3.2mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be u..
R 31.30
Brand: TORK CRAFT
Model: TCMT001DC
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is Ø0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
..
R 127.85
Brand: PG
Model: M8010
Collet set for thread 8 x 0.75
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
Ø 1.00mm
Ø 1.50mm
Ø 2.35mm
Ø 3.00mm
Ø 3.20mm
Collet nut included for 8 x 0.75 thread....
R 209.80
Brand: PG
Model: M8560
Keyless chuck for thread 9/32 x 40
The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm.....
R 391.60
Brand: TORK CRAFT
Model: TC08390
Quick change collet kit
The quick change collet allows you to fit the following collet diameters:
Ø 0.8mm
Ø 1.6mm
Ø 2.4mm
Ø 3.2mm
Make sure to tighten the collet nut with a collet wrench.....
R 67.60
Brand: TORK CRAFT
Model: TC08393
Replacement collet - Ø 3.2mm
The collet is used to hold mini rotary accessories with a shank diameter of Ø 3.2mm....
R 20.85
Brand: TORK CRAFT
Model: TCMT001-2-3-2
Flexible shaft for TCMT001 rotary tool
Collet diameter: Ø2.3mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also be u..
R 31.50
Brand: TORK CRAFT
Model: TC08391
Replacement collet - Ø 0.8mm
The collet is used to hold mini rotary accessories with a shank diameter of Ø 0.8mm....
R 20.85
Brand: TORK CRAFT
Model: TC08394
Multi chuck - Ø 0.8mm - 3.2mm
The multi chuck is ideal for mini and micro drill bits, to secure hold different diameter accessories from Ø 0.8mm up to Ø 3.2mm....
R 85.80