Door Making Bits
Brand: PRO-TECH
Model: KP24132010
Beadboard
or Panel Mould bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make beaded panels for any project by routing side by side grooves on the face of the panel.
This router bit is also..
R 303.40
Brand: PRO-TECH
Model: KP3801
Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain,..
R 960.80
Brand: PRO-TECH
Model: KP404011
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,161.00
Brand: PRO-TECH
Model: KP412431
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,548.40
Brand: PRO-TECH
Model: KP452411
Double reversible rail & stile cutter set
Carbide Tipped
- Ogee
The cutter contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that ..
R 1,437.75
Brand: PRO-TECH
Model: KP49570
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used f..
R 557.85
Brand: PRO-TECH
Model: KP551
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most sma..
R 1,161.00
Brand: PRO-TECH
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 798.45
Brand: PRO-TECH
Model: KP686
25 Degree Raised Panel bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,327.05
Brand: PRO-TECH
Model: KPS6102
Panelling Bevel router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,138.85
Brand: PRO-TECH
Model: KPS6105
Radiused Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the..
R 1,138.85
Out Of Stock
Brand: FESTOOL
Model: FES491036
Festool Aluminium cutter HS S8 D5/NL23
Order number: FES491036
Model: HS S8 D5/NL23 ....
R 657.80