Nozzle 0.3mm For A130 Airbrush

Features

• 0.3mm Nozzle Size Versatile spray pattern suited to both detail and general coverage.
• Designed For A130 Replacement nozzle made to fit the AirCraft A130 airbrush.
• Improves Atomisation Helps restore clean, even spraying when the original nozzle is worn or blocked.
• More Forgiving Flow Typically handles a wider range of paint viscosities compared to finer nozzles.

Benefits

• Smoother Coverage: Ideal for base layers, gradients and broader shading with consistent results.
• Reduced Clogging Risk: 0.3mm nozzles are generally less sensitive to minor paint thickness issues.
• Reliable Control: Supports predictable spray patterns for cleaner finishes.
• Extend Airbrush Life: Replacing worn nozzles helps protect needles and internal seating surfaces.

Extra Information

• When to replace a nozzle: uneven spray pattern, spitting/sputtering, visible damage, or clogging that cleaning cannot resolve.
• Paint prep: Thin paint appropriately and strain when needed—clean paint dramatically reduces nozzle issues.
• Cleaning tip: Clean immediately after use; dried paint inside the nozzle causes most performance problems.
• Installation care: Avoid over-tightening—nozzles are precision parts and can crack if forced.
• Best performance: Pair with the correct needle size and nozzle cap for the A130 setup.

Specifications

Safety

• Disconnect and depressurise the air supply before disassembling the airbrush.
• Use eye protection during cleaning and when working with solvents or cleaners.
• Work in a well-ventilated area, especially with solvent-based paints or thinners.
• Do not force or over-tighten the nozzle—precision parts can crack if stressed.
• Test spray with clean thinner/water first to confirm correct assembly before spraying paint.