Needle 0.5mm For A130 Airbrush

Features

• 0.5mm Needle Size Designed for high-flow spraying and broader coverage.
• Designed For A130 Replacement needle made to fit the AirCraft A130 airbrush.
• Restores Smooth Paint Control Helps correct spitting and inconsistent flow caused by bent or worn needles.
• More Forgiving Setup Typically better suited to thicker paints and heavier pigments than finer needle sizes.

Benefits

• Faster Coverage: Ideal for base coats, backgrounds, priming and larger surfaces.
• Reduced Spitting & Pulsing: A straight needle improves seating and stabilises paint flow.
• Less Clogging Sensitivity: High-flow setups generally clog less easily with properly prepared paint.
• Extend Airbrush Life: Replacing a damaged needle helps protect the nozzle seat and keeps the airbrush performing reliably.

Extra Information

• When to replace the needle: bent tip, scratches/scoring, uneven flow, or persistent spitting even after cleaning.
• Match the size: Use with the correct 0.5mm nozzle setup for proper sealing and best spray performance.
• Best use cases: base coats, backgrounds, broader gradients, priming and general coverage work.
• Cleaning tip: Wipe the needle gently after each session—paint build-up affects flow and can stress the nozzle.
• Installation note: Insert gently; resistance usually means dried paint or misalignment—clean and recheck rather than forcing it.

Specifications

Safety

• Disconnect and depressurise the air supply before disassembly.
• Handle needle tips carefully—sharp and delicate parts can cause injury or damage if mishandled.
• Use eye protection during cleaning, especially when using solvents or pressurised air.
• Work in a well-ventilated area when using cleaners, thinners or solvent-based paints.
• Test spray with water/thinner first to confirm correct assembly before spraying paint.