Nozzle 0.5mm For Sg A130k

Features

• 0.5mm Nozzle Size Higher flow and broader spray pattern suited to coverage-focused work.
• Replacement Part For SG-A130K Designed to fit the AirCraft SG-A130K airbrush model.
• Improves Atomisation Helps restore clean, even spraying when the original nozzle is worn or blocked.
• More Forgiving With Paint Typically handles thicker paints and heavier pigments more easily than finer nozzles.

Benefits

• Faster Coverage: Ideal for base coats, backgrounds and larger areas where time and consistency matter.
• Reduced Clogging Risk: 0.5mm nozzles generally clog less easily when paint prep isn’t perfect.
• Smoother Base Layers: Helps lay down even coats with fewer passes.
• Extend Airbrush Life: Replacing worn nozzles helps protect needles and the airbrush seating surfaces.

Extra Information

• When to replace a nozzle: uneven spray, spitting/sputtering, visible damage, or blockage that cleaning cannot resolve.
• Best use cases: base coats, backgrounds, broader gradients, priming and general coverage work.
• Paint prep: Even with a 0.5mm nozzle, mix and strain paint when needed for the cleanest finish.
• Cleaning tip: Clean promptly after use—dried paint is still the enemy, no matter the nozzle size.
• Compatibility: Intended for the AirCraft SG-A130K airbrush.

Specifications

Safety

• Disconnect and depressurise the air supply before disassembling the airbrush.
• Use eye protection during cleaning and when working with solvents or cleaners.
• Work in a well-ventilated area, especially with solvent-based paints or thinners.
• Do not force or over-tighten the nozzle—precision parts can crack if stressed.
• Test spray with clean thinner/water first to confirm correct assembly before spraying paint.